Verifying The Status Of The Iprint Setup; Migrating The Iprint Cluster Resource From Netware To Oes 2 Linux - Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual

Cluster services conversion guide
Hide thumbs Also See for OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010:
Table of Contents

Advertisement

exit_on_error rcnovell-idsd start
exit_on_error rcnovell-ipsmd start
2 Edit the unload script. Add the following lines to the existing unload script after the
novell/ncs/lib/ncsfuncs
ignore_error rcnovell-ipsmd stop
ignore_error rcnovell-idsd stop
3 Activate the load and unload scripts by taking the resource offline, then bringing the resource
online.

13.2.5 Verifying the Status of the iPrint Setup

Verify that the iPrint cluster resource is working by cluster migrating the OES 2 Linux iPrint cluster
resource to each OES 2 Linux node in turn and performing the following checks:
1 Log in as the
then open a terminal console.
2 Check the status of the Print Manager and Driver Store.
rcnovell-ipsmd status
rcnovell-idsd status
3 Test the ability of
iprntman psm -l -u admin
4 Cluster migrate the iPrint cluster resource to another OES 2 Linux node by entering
cluster migrate resource_name node_name
5 Repeat this check for each OES 2 Linux node in the mixed-node cluster.
13.3 Migrating the iPrint Cluster Resource from
NetWare to OES 2 Linux
After iPrint is configured for the OES 2 Linux nodes, you are ready to migrate the iPrint Driver
Store and Print Manager information from the NetWare iPrint cluster resource to the OES 2 Linux
iPrint cluster resource.
Perform the following steps in
Tool Administration
1 Perform the pre-migration checks as described in
OES 2 SP3: Migration Tool Administration
2 Perform a consolidated migration of the iPrint service as described in
Migration" in the
Start the Migration Tool from the target server (the OES 2 Linux node where the iPrint cluster
resource is active).
For the source server, authenticate by using the IP address or DNS name of the NetWare iPrint
cluster resource.
For the target server, authenticate by using the IP address or DNS name of the Linux iPrint
cluster resource.
3 Verify that the migration was successful as described in
Migration" in the
58
OES 2 SP3: Novell Cluster Services Conversion Guide
statement:
user on the OES 2 Linux node where the iPrint cluster resource is active,
root
to authenticate the admin user (or other user given with
iprntman
"Migrating an iPrint Cluster
Guide.
OES 2 SP3: Migration Tool Administration
OES 2 SP3: Migration Tool Administration
Resource" in the
"Pre-Migration iPrint
Guide.
Guide.
"Verifying the Result of the iPrint
Guide.
/opt/
).
miggui
OES 2 SP3: Migration
Configuration" in the
"iPrint Consolidate

Advertisement

Table of Contents
loading

This manual is also suitable for:

Open enterprise server 2 sp3

Table of Contents