Converting Netware 6.5 Clusters To Oes 2 Linux; Planning The Conversion Of Load And Unload Scripts; July 30, 2009; Planning The Cluster Conversion - Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual

A.7.1 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
Section 4.3, "Finalizing the
Cluster Conversion," on
page 32
A.7.2 Planning the Conversion of Load and Unload Scripts
Location
Section 3.7, "Customizing
the Translation Syntax for
Converting Load and Unload
Scripts," on page 25
A.8 July 30, 2009
Updates were made to the following section. The changes are explained below.

Section A.8.1, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 73

Section A.8.2, "Planning the Cluster Conversion," on page 73
A.8.1 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
Section 4.3, "Finalizing the
Cluster Conversion," on
page 32
A.8.2 Planning the Cluster Conversion
Location
Section 1.12, "Using Novell
iManager in Mixed-Node
Clusters," on page 13
Section 1.13, "Using Novell
Remote Manager Is Not
Supported in Mixed-Node
Clusters," on page 13
Change
Modified Step 3 to state that you must run
ncs-configd.py -init
Cluster Services on each of the nodes in the cluster.
Change
This section is new.
Change
WARNING: After you finalize the cluster conversion, rollback to NetWare
is not supported.
Change
This section is new.
Use Novell iManager 2.7.2 or later for all cluster administration in the
mixed-node cluster.
Do not use Novell Remote Manager when managing mixed-node clusters.
Novell Remote Manager is not supported for cluster management on OES
2 Linux.
/opt/novell/ncs/bin/
on each of the nodes in the cluster, or restart
Documentation Updates 73