Converting Netware 6.5 Clusters To Oes 2 Linux; Novell Distributed File Services Vldb; Planning The Cluster Conversion; Planning The Conversion Of Load And Unload Scripts - Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual

A.1.2 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
Step 1 in "Finalizing the
Cluster Conversion" on
page 32
A.1.3 Novell Distributed File Services VLDB
Location
Step 2 in "Cluster Migrating
the Shared NSS Volume for
the VLDB" on page 47
Step 2 in "Adding a Linux
Server as a Replica Site" on
page 48
A.1.4 Planning the Cluster Conversion
Location
Section 1.11, "Managing File
Systems in Mixed-Node
Clusters," on page 12
A.1.5 Planning the Conversion of Load and Unload Scripts
Location
Section 3.2, "Comparing
Script Length Limits for
NetWare and Linux," on
page 20
A.2 May 31, 2010 (Maintenance Patch)
Updates were made to the following sections. The changes are explained below.

Section A.2.1, "Novell AFP," on page 71

Section A.2.2, "Novell CIFS," on page 71
70 OES 2 SP3: Novell Cluster Services Conversion Guide
Change
Beginning in OES 2 SP3, you can use the
command to preview all resources.
all
Change
For each of the Linux nodes, assign the node's nssadmin user as a
trustee of the container that is configured as the Management Context for
the VLDB, and give the user at least the
[All Attribute Rights]
Change
If you need to configure (or reconfigure) existing shared NSS pools and
volumes in a mixed-node cluster, you must temporarily bring down all
Linux cluster nodes prior to making changes, then make the configuration
changes on a NetWare node. Make sure the resources are working
properly on NetWare before having the Linux cluster nodes rejoin the
cluster.
Change
This section is new.
cluster convert preview
and
Read Compare
property.
rights to the