Converting Netware 6.5 Clusters To Oes 2 Linux; January 4, 2010; A.5 January 4, 2010; Edirectory Server Certificates - Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual

A.4.1 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
"Converting NetWare Cluster
Nodes to OES 2 Linux
(Rolling Cluster Conversion)"
on page 27
"Finalizing the Cluster
Conversion" on page 32

A.5 January 4, 2010

Updates were made to the following section. The changes are explained below.

Section A.5.1, "eDirectory Server Certificates," on page 72
A.5.1 eDirectory Server Certificates
Location
"Using Internal Certificates in
a Cluster" on page 44
A.6 December 10, 2009
Updates were made to the following section. The changes are explained below.

Section A.6.1, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 72
A.6.1 Converting NetWare 6.5 Clusters to OES 2 Linux
Location
Section 4.1, "Converting
NetWare Cluster Nodes to
OES 2 Linux (Rolling Cluster
Conversion)," on page 27
A.7 November 2009 (OES 2 SP2)
Updates were made to the following sections. The changes are explained below.

Section A.7.1, "Converting NetWare 6.5 Clusters to OES 2 Linux," on page 73

Section A.7.2, "Planning the Conversion of Load and Unload Scripts," on page 73
72 OES 2 SP3: Novell Cluster Services Conversion Guide
Change
.Step 11 was removed. A cluster restart is no longer required.
.Step 3 was revised. A cluster restart is no longer required.
Change
.This section was modified for clarity.
.
Change
Added the following instruction in
You can do this by running NWConfig, then selecting Product Options >
Directory Options <install NDS> > Remove Directory Services from this
server.
Step 3 on page 28: