Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual page 38

5c On the Software Selection page, under Primary Functions, select Web and LAMP Server,
then click Accept.
5d Continue with the installation.
6 (Optional) Install Tomcat.
6a Log in as the
6b In YaST, click Software in the left pane, then click Software Management in the right pane.
6c In the Search field, type
6d Select the Tomcat packages you want to install, then click Accept.
If you encounter a dependency conflict, select the package you want to install to resolve
the conflict, then click OK -- Try Again to continue with the installation.
7 After the Web services are installed on all nodes, log in as the
then configure the Apache Web Server.
7a Log in as the
In YaST, click Network Services in the left pane, then click HTTP Server in the right pane.
Apache is referred to as the HTTP Server on Linux.
7b Configure the following HTTP Server settings by using the HTTP Server Wizard:
For wizard instructions, see
www.novell.com/documentation/sles10/book_sle_reference/data/
sec_apache2_configuration.html#sec_apache2_configuration_yast)
Installation and Administration Guide (http://www.novell.com/documentation/sles10/
book_sle_reference/data/book_sle_reference.html).
38 OES 2 SP3: Novell Cluster Services Conversion Guide
user, then open YaST.
root
tomcat
user, then open YaST.
root

Port (and open the firewall)
, then click Search.
"Section 40.2.2, Configuring Apache with YaST" (http://
user on the master node,
root
in the SLES 10 SP3