Post-Migration Considerations; Searching The Cluster Volume - Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual

11 Update all NetWare paths in the properties and configuration files copied in the steps above to
the Linux paths, and update any DNS names.
The following files must be updated:
AdminServlet.properties
Cron.jobs
Sites/Highlighter.properties
Sites/Print.properties
Sites/Search.properties
For each of the virtual search servers, modify the following:
 qfind.cfg

Any of the above
IMPORTANT: Linux filenames are case sensitive.
The names of most properties files are mixed case, so make sure the files copied from NetWare
are the correct case. You can compare them to the
You might also need to update paths in templates. If you have problems such as a template not
being found or some properties not being set properly, check the case of the filename.
If you modified any "file" index paths to index directories on the Linux server, that index must
be regenerated.
12 After all the files have been modified, run the following commands to set the access rights and
the owner and groups so that the QuickFinder engine has rights to access the files.
As the user, enter
root
chown -R root:www /var/lib/qfsearch
chmod -R 770 /var/lib/qfsearch
13 Repeat
Step 1 to Step 12

15.4 Post-Migration Considerations

QuickFinder Server 5.0 indexes are not compatible with previous versions of QuickFinder Server.
The indexes must be regenerated, and you cannot synchronize QuickFinder Server 5.0 indexes with
indexes from a previous version of QuickFinder Server (and vice-versa).

15.5 Searching the Cluster Volume

To perform a search on the shared volume after the NetWare migration is complete:
1 Open a Web browser, then enter
http://DNS_CLUSTER/qfsearch/search
QuickFinder Server sees the DNS and sends the request to the appropriate virtual search server.
files, if they exist.
.properties
for each NetWare and Linux pair of nodes.
files on Linux.
.properties.sample
QuickFinder Server 65