Novell OPEN ENTERPRISE SERVER - CONVERSION GUIDE 12-2010 Manual page 56

move the iPrint configuration information from the default Linux installation path on each node to
the newly created shared NSS pool resource. Later, you will move the iPrint Driver Store and Print
Manager information from the NetWare resource to the OES 2 Linux resource.
1 In a Web browser, open iManager, then use the Storage role to create a new shared pool and
volume on one of the OES 2 Linux servers where iPrint is installed.
This is the iPrint cluster resource that will contain the iPrint data.
For information about creating a clustered NSS pool and volume, see
Enabled Pools and
Guide for
2 On the first OES 2 Linux node, set up clustering for iPrint on the shared NSS volume that you
created in
2a Log in as the
then open a terminal console.
2b Go to the
by entering
./iprint_nss_relocate -a admin_fdn -p admin_password -n
nss_volume_path -l cluster [-c <Specify Container FDN where iPrint LUM
object already
exists or should be created>] [-w <Specify Container FDN where Apache
LUM objects exist>]
Replace admin_fdn with the comma-delimited fully distinguished name of the iPrint
administrator user (such as
actual password of the specified iPrint administrator user. Replace nss_volume_path with
the Linux path (such as
want to relocate the iPrint configuration data.
For information about the script options, see
the
For example, enter
./iprint_nss_relocate -a cn=admin,o=mycompany -p password -n /media/
nss/NSSVOL1 -l cluster -c o=mycompany,t=iPrint_Tree -w
o=mycompany,t=iPrint_Tree
2c Review the messages displayed on the screen to confirm the data migration from the local
Linux path to the shared NSS path is completed.
3 For each remaining Linux node in the cluster where iPrint is installed, set up clustering for
iPrint by doing the following:
3a Log in as the
then open a terminal console.
3b Cluster migrate the shared NSS pool resource from the active OES 2 Linux node to this
OES 2 Linux node by entering
cluster migrate resource_name node_name
3c Log in to the newly active OES 2 Linux node as the
console.
3d Run the
3e Repeat
iPrint.
56 OES 2 SP3: Novell Cluster Services Conversion Guide
Volumes" in the
Linux.
Step 1.
user to the OES 2 Linux node where the shared pool resource is active,
root
/opt/novell/iprint/bin
cn=admin,o=mycompany
/media/nss/NSSVOL1
OES 2 SP3: iPrint for Linux Administration
user to the OES 2 Linux node where the shared pool resource is active,
root
iprint_nss_relocate
Step 3a through Step 3d
OES 2 SP3: Novell Cluster Services 1.8.8 Administration
folder, then run the
). Replace admin_password with the
) to the shared NSS volume where you
"Setting up iPrint on an NSS File
Guide.
root
script as described in Step
until all of the OES 2 Linux nodes are configured for
"Creating Cluster-
iprint_nss_relocate
System" in
user, then open a terminal
2b, using the same values.
script