Configuring The Ifolder Enterprise Server - Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual

6.2.1 Configuring the iFolder Enterprise Server

After you install the iFolder enterprise server, you must configure the iFolder services, including the
LDAP, iFolder system, and iFolder administration settings.
1 If you plan to use an NSS volume as the System Store Path for the users' iFolder data, use
iManager to create the NSS volume, then create a directory on the volume.
For information, see
Administration
2 Log in to the server as the root user, or open a terminal console, enter
password.
3 Start YaST, follow the YaST on-screen instruction to finish the installation. For more
information see
"Installing iFolder on an Existing OES 2 Linux SP1 Server," on page
4 Select Use Following Configuration and click Novell iFolder to change the default
configuration settings for iFolder.
If you decide to use default settings, click Next to start Novell iFolder 3 configuration.
IMPORTANT: For security reasons, it is recommended that you always change the default
iFolder configuration settings.
5 Follow the Yast on-screen instructions to proceed through the Novell iFolder 3 configuration.
The following table summarizes the decisions you make.
56 OES 2 SP1: Novell iFolder 3.7 Administration Guide
"Managing NSS Volumes" in the
Guide.
Step 1 on page 53 through
OES 2 SP1: NSS File System
Step 7 on page 55 in the section
, then enter the
su root
Section 6.1,
53.