Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual page 61

Install Settings Description
Novell iFolder
System
Configuration
The iFolder Default Administrator: Specify the username for the default
iFolder Admin user. Use the full distinguished name of the iFolder Admin
user. For example:
LDAP source, ensure that the iFolder Admin user is created using Active
Directory tools before specifying it here.
iFolder Admin Password: Specify a password for the iFolder Admin
user.
Verify iFolder Admin Password: Type the password for the iFolder
Admin user again.
LDAP Proxy User: Specify the full distinguished name of the LDAP
Proxy user. For example:
have the Read right to the LDAP service. The LDAP Proxy user is used
for provisioning the users between the iFolder Enterprise Server and the
LDAP server. If the Proxy user does not exist, it is created and granted the
Read right to the root of the tree. If the Proxy user already exists, but the
given credentials don't match, then a new Proxy user is automatically
created. The Proxy user's domain name (dn) and password are stored by
the iFolder. If the Active Directory is the LDAP source, ensure that the
iFolder Proxy user is created using Active Directory tools before you
specify it here.
cn=admin,o=acme . If the Active Directory is the
cn=iFolderproxy,o=acme.
Installing and Configuring iFolder Services
This user must
61