C Clustering Ifolder 3.7 Servers With Novell Cluster Services For Linux; Prerequisites For Clustering Ifolder 3.7 Services; Installing Novell Cluster Services For Linux - Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual

Hide thumbs Also See for IFOLDER 3.7 - ADMINISTRATION:
Table of Contents

Advertisement

Clustering iFolder 3.7 Servers with
C
Novell Cluster Services for Linux
This section discusses how to configure a Novell
Services
(NCS) for Linux.
TM
Section C.1, "Prerequisites for Clustering iFolder 3.7 Services," on page 173
Section C.2, "Installing Novell Cluster Services for Linux," on page 173
Section C.3, "Configuring iFolder 3.7 Servers on a NCS for Linux Cluster," on page 174
Section C.4, "Creating the iFolder 3.7 Cluster Resource," on page 175
Section C.5, "Managing the iFolder 3.7 Cluster Resource," on page 176
Section C.6, "Sample Load Scripts for iFolder 3.7 Clusters," on page 176
Section C.7, "Sample Unload Scripts for iFolder 3.7 Clusters," on page 177
Section C.8, "Sample Monitor Scripts for iFolder 3.7 Clusters," on page 180
For information about Novell Cluster Services (NCS), see the
1.8.6 for Linux Administration
C.1 Prerequisites for Clustering iFolder 3.7
Services
Each node in your iFolder 3.7 cluster must satisfy the following requirements:
"Prerequisites and Guidelines" on page 47
Prerequisites and requirements for Novell Cluster Services for Linux. For information, see
"Installing Novell Cluster Services on OES 2
1.8.4 for Linux Administration Guide.
C.2 Installing Novell Cluster Services for Linux
For each node in the planned cluster:
IMPORTANT: If you are using iSCSI for shared disk system access, ensure that you have
configured iSCSI initiators and targets prior to installing Novell Cluster Services.
1 Make sure each node in the cluster satisfies the requirements in
Clustering iFolder 3.7 Services," on page
2 Install and configure Novell Cluster Services (NCS) on the Open Enterprise Server (OES)
Linux 2 servers you plan to use in the iFolder 3.7 cluster.
For information on installing NCS, see the section
2
Linux" in the OES 2 SP1: Novell Cluster Services 1.8.4 for Linux Administration Guide.
3 Ensure that there is at least one shared storage setup that is cluster enabled, either Linux POSIX
Volume(s) or NSS volume(s).
®
iFolder
Guide.
for iFolder 3.7.
Linux" in the OES 2 SP1: Novell Cluster Services
173.
"Installing Novell Cluster Services on OES
Clustering iFolder 3.7 Servers with Novell Cluster Services for Linux
®
3.7 server cluster, using Novell Cluster
OES 2 SP1: Novell Cluster Services
Section C.1, "Prerequisites for
C
173

Advertisement

Table of Contents
loading

Table of Contents