Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual page 59

Install Settings Description
Novell iFolder
System
Configuration
Name of iFolder Server: Specify a unique name to identify your iFolder
server. For example,
iFolder public URL Host or IP Address: Specify the public URL to
reach the iFolder server.
IMPORTANT: You must specify the DNS name of the server as iFolder
Public URL to connect the client to the server using a DNS name. In this
case, users need not remember all the IP addresses they are provisioned
to. A single DNS name can map them to the respective server IP based
on their location as in office or home.
iFolder private URLHost or IP Address: Specify the private URL
corresponding to the iFolder server to allow communication between the
servers within the iFolder domain. The Private URL and the Public URL
can be the same.
NOTE: You can use a single URL for the iFolder server if it is accessed
only inside the corporate firewall. If the server needs to be accessed
outside the firewall, you must provide two different URLs: Private and
Public. The private URL is used for server to server communication within
the corporate firewall and this should not be exposed to outside of the
firewall. The public URL is used for the iFolder clients that can
communicate from outside the corporate firewall. The clients can be
inside or outside of the firewall and based on this, you can use private or
public URL, or use public URL all the time.
IF3EastS
Installing and Configuring iFolder Services 59