Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual page 74

2 Start YaST to refresh its list of installed configuration modules.
3 Click Novell iFolder in the window displays with Novell Open Enterprise Server
Configuration.
4 Click Next to start configuring the iFolder Web Admin.
5 In YaST, select iFolder Web Admin.
6 Follow the Yast on-screen instructions to proceed through the iFolder 3 Web Admin
configuration. The table summarizes the decisions you make.
Install Settings
Web Admin Alias
iFolder Server URL
Redirect URL for iChain/
AccessGateway
Connect to iFolder
server using SSL
iFolder server port to
connect on
Require Server SSL
After you complete the YaST configuration for Web Admin console, restart Apache server.
7 When the system prompts you to restart the Apache server, accept the option by clicking Yes.
Restarting Apache is necessary to use the new settings.
74 OES 2 SP1: Novell iFolder 3.7 Administration Guide
Description
The user-friendly path for accessing iFolder services on the specified
iFolder 3 enterprise server.
For example:
/admin
Specify the host or IP address of the iFolder Enterprise Server to be used
by the iFolder Web Admin application. This Web Admin application
performs all the user-specific iFolder operations on the host that runs the
iFolder Enterprise Server.
Specify the redirect URL for iChain/AccessGateway that will be used by
the iFolder Web Access application. This URL is used for the proper
logout of iChain/AccessGateway sessions along with the iFolder session.
Select the check box to establish a secure connection between the
iFolder enterprise server and the iFolder Web Admin application.
Specify the port for the the Web Admin application to connect to the
iFolder server. Port 443 is the default. Port 80 is the default value for non-
SSL communication.
Select the check box to establish a secure connection between the Web
browser and the iFolder Web Admin application. This enables a secure
SSL channel between the two.
IMPORTANT: If this option is not enabled, you cannot login to Web
Admin via iManager.