Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual page 64

Install Settings
iFolder Web
Admin
Configuration
6 When the system prompts you to restart the Apache server, accept the option by clicking Yes,
then restart the Apache server. This is necessary to use the new settings.
To manually restart the Apache Web server,
6a Open a terminal console, then log in as the
6b Stop the Apache server by entering either of the following commands at the prompt:
/etc/init.d/apache2 stop
rcapache2 stop
6c Start Apache by entering either of the following commands at the prompt:
64 OES 2 SP1: Novell iFolder 3.7 Administration Guide
Description
An Apache alias that will point to the iFolder Web Admin
Application: Specify the Apache alias to point to the iFolder Web Access
Application. This is a user-friendly pointer for the Apache service. For
example, /admin
The host or IP address of the iFolder server that will be used by the
iFolder Web Admin application: Specify the host or IP address of the
iFolder Enterprise Server to be used by the iFolder Web Access
application. This Web Access application performs all the user-specific
iFolder operations on the host that runs the iFolder Enterprise Server.
Connect to iFolder server using SSL: This option is selected by default
to establish a secure connection between iFolder enterprise server and
the iFolder Web Admin application.
iFolder server port to connect on: Specify the port for the iFolder
server to connect to the Web Admin application. Port 443 is the default.
Port 80 is the default value for non-SSL communication.
Require a secure connection between the browser and the iFolder
Web Admin application: Select the check box to establish a secure
connection between the Web browser and the iFolder Web Admin
application. This enables a secure SSL channel between the two.
user.
root