Novell IFOLDER 3.7 - ADMINISTRATION Administration Manual page 70

Install Settings
iFolder Web
Admin
Configuration
4 Click Accept to complete the configuration.
5 When the system prompts you to restart the Apache server, accept the option by clicking Yes,
then restart the Apache server. This is necessary to use the new settings.
To manually restart the Apache Web server,
5a Open a terminal console, then log in as the
5b Stop the Apache server by entering either of the following commands at the prompt:
/etc/init.d/apache2 stop
rcapache2 stop
5c Start Apache by entering either of the following commands at the prompt:
/etc/init.d/apache2 start
rcapache2 start
6 Go to Novell iManager to install the Novell iFolder plug-in or to manage iFolder services.
7 If you are using an NSS volume to store user data, you must set up NSS file system trustee
rights for the Web server user object
console prompt, log in as the root user or equivalent, then enter
rights -f /media/nss/NSSVOL -r rwfcem trustee wwwrun.ou.o.treename
If you ever get
in, this is a sure sign that you have not set up file system trustee rights within NSS properly.
70 OES 2 SP1: Novell iFolder 3.7 Administration Guide
Description
An Apache alias that will point to the iFolder Web Admin
Application: Specify the Apache alias to point to the iFolder Web Admin
Application. This is a user-friendly pointer for the Apache service. For
example, /admin
The host or IP address of the iFolder server that will be used by the
iFolder Web Admin application: Specify the host or IP address of the
iFolder Enterprise Server to be used by the iFolder Web Admin
application. This Web Admin application performs all the user-specific
iFolder operations on the host that runs the iFolder Enterprise Server.
Redirect URL for iChain/AccessGateway (optional): Specify the
redirect URL for iChain/AccessGateway that will be used by the iFolder
Web Access application. This URL is used for the proper logout of iChain/
AccessGateway sessions along with the iFolder session.
Connect to iFolder server using SSL: Select the check box to establish
a secure connection between the iFolder enterprise server and the iFolder
Web Admin application.
iFolder server port to connect on: Specify the port for the Web Admin
application to connect to the iFolder server. Port 443 is the default. Port 80
is the default value for non-SSL communication.
Require a secure connection between the browser and the iFolder
Web Admin application: Select the check box to establish a secure
connection between the Web browser and the iFolder Web Admin
application. This enables a secure SSL channel between the two.
wwwrun
An Internal Error has occurred
user.
root
before restarting your web server. At a terminal
error message within the iManager plug-