Chipset Features Setup - JETWAY 993AN User Manual

3-3 CHIPSET FEATURES SETUP

This section describes features of the VIA Apollo Pro AGPset. If your system contains a different
chipset, this section will bear little resemblance to what you see on your screen.
ADVANCED OPTIONS. The parameters in this screen are for system designers, service
personnel, and technically competent users only. Do not reset these values unless you
understand the consequences of your changes.
Bank 0/1 DRAM Timing
Bank 2/3 DRAM Timing
Bank 4/5 DRAM Timing
SDRAM Cycle Length
DRAM Clock
Memory Hole
Read Around write
Concurrent PCI/Host
System BIOS Cacheable
Video RAM Cacheable
AGP Aperture Size
AGP-2X Mode
OnChip USB
USB Keyboard Support
Esc: Quit
F1 : Help
F5 : Old Values
• In this item you can choose the CPU HOST/PCI Clock. The setting are:
Default ,66/33,75/37,83/41,100/33,103/34, 112/37,124/41, 105/35,110/36,115/38,
120/40,133/33,140/35,150/37.
When the setting is :"default" the CPU HOST Clock will depend on the setting of JP12 and
JP11.
If JP12,JP11 are set to 66MHz only have the choice of 66/33, 75/37, 83/41 on screen.
If the JP12,JP11 are setting at 100MHz, then you can have 100/33,103/34,112/37,124/41,
105/35,110/36,115/38,120/40.
If JP12,JP11 are setting at 133MHz, the you have the choice: 133/33,140/35,150/37.
*Please turn off system power if the screen does not have any display after change of the
setting. Then press and hold down " INS " key, and turn on system power again (release
" INS " key till the screen has display) to reset correct frequency of CPU HOST clock.
•
DRAM Clock: In this item you have the choice : Host CLK , HCLK+33M, HCLK –33M. We
recommend the Max. DRAM clock
•
Vcore , +3.3V,+5V,+12V,-12V, are show the status of system voltages.
3-4 POWER MANAGEMENT SETUP
ROM PCI/ISA BIOS (2A6LGJ1F)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: SDRAM 10ns
: SDRAM 10ns
: SDRAM 10ns
: 3
: Host CLK
: Disabled
: Disabled
: Disabled
: Enabled
: Enabled
: 64M
: Enabled
: Enabled
: Disabled
↑↓→←: Select Item
PU/PD/+/-:Modify
(Shift)F2 : Color
≤
Auto Detect DIMM/PCI Clk : Enabled
Spread Spectrum
CPU Host/PCI Clock
Current System Temp.
Current CPU
Current CPUFAN
Current SYSFAN Speed
Core : 2.80V
+5V : 5.10V
-12V : 12 V
Shutdown Temperature
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-3
133MHz otherwise the system will not stable.
21
: Disabled
: Default
: 34 ° C/93 ° F
Temperature : 44 ° C/111 ° F
Speed : 0 RPM
: 0 RPM
+3.3V : 3.3V
+12V : 12 V
: 75 ° C/167 ° F