Chipset Features Setup - JETWAY BX2000 Manual

manufacturer's default values of this mainboard. Again, user can move the cursor by pressing
direction keys and <PgDn> of <PgUp> keys to modify the parameters. Pressing [F1] key to
display help message of the selected item.
This setup program also provide 2 convenient ways to load the default parameter data from
BIOS [F6] or CMOS [F7] area if shown data is corrupted. This provides the system a capability
to recover from any possible error.
ROM PCI/ISA BIOS (2A6LGJ1F)
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking : Enabled
Processor Number Feature : Enabled
Quick Power On Self Test : Enabled
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
IDE HDD Block Mode
Gate A20 Option
Memory Parity/ECC Check : Disabled
Typematic Rate Setting
Typematic Rate (Chars/Sec) : 6
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
Esc: Quit ↑↓→← : Select Item
F1 : Help
F5 : Old Values (Shift)F2 : Color
NOTE: The Security Option contains "setup" and "system". The "setup" indicates that the password
setting is for CMOS only while the "system" indicates the password setting is for both CMOS
and system boot up procedure.

Security Option: This category allows you to limit access to the system and
System: The system will not boot and access to Setup will be denied if the correct
password is not entered at the prompt.
Setup: The system will boot, but access to Setup will be denied if the incorrect password is
entered at the prompt.
NOTE: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked
to enter password. Do not type anything and just press <Enter>, it will disable security. Once
the security is disabled, the system will boot and you can enter Setup freely.

3-3 CHIPSET FEATURES SETUP

This section describes features of the VIA 82C693 AGPset. If your system contains a different
chipset, this section will bear little resemblance to what you see on your screen.
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled
: Enabled
: Enabled
: A,C,SCSI
: Disabled
: Enabled
: On
: Enabled
: Fast
: Disabled
: 250
: Setup
: Disabled
PU/PD/+/-:Modify
Setup, or just to Setup. The default value is Setup.
OS Select For DRAM > 64MB : Non-OS2
HDD S.M.A.R.T Capability : Disabled
Video BIOS Shadow
C8000-CBFFF Shadow
CC000-CFFFF Shadow
D0000-D3FFF Shadow
D4000-D7FFF Shadow
D8000-DBFFF Shadow
DC000-DFFFF Shadow
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-2
17
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled