Chipset Features Setup - JETWAY 9BXAS Manual

External Cache
Quick Power On Self Test : Disabled
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up Numlock Status
Boot Up System Speed
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec) : 6
Typematic Delay (Msec)
Security Option
Assign IRQ for VGA
Esc: Quit ↑↓→← : Select Item
F1 : Help
F5 : Old Values (Shift)F2 : Color
NOTE: The Security Option contains "setup" and "system". The "setup" indicates that the password
setting is for CMOS only while the "system" indicates the password setting is for both CMOS
and system boot up procedure.

Security Option: This category allows you to limit access to the system and
System: The system will not boot and access to Setup will be denied if the correct
password is not entered at the prompt.
Setup: The system will boot, but access to Setup will be denied if the incorrect password is
entered at the prompt.
NOTE: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked to
enter password. Do not type anything and just press <Enter>, it will disable security. Once the
security is disabled, the system will boot and you can enter Setup freely.

3-3 CHIPSET FEATURES SETUP

This section describes features of the Intel 440BX/440ZX PCIset. If your system contains a
different chipset, this section will bear little resemblance to what you see on your screen.
ADVANCED OPTIONS. The parameters in this screen are for system designers, service
personnel, and technically competent users only. Do not reset these values unless you
understand the consequences of your changes.
ROM PCI/ISA BIOS (2A69KJ1L)
Auto Configuration
EDO DRAM Speed Selection : 60 ns
EDO CASx# MA Wait Srate : 2
EDO RASx# Wait State
SDRAM RAS-to-CAS Delay : 3
SDRAM RAS Precharge Time : 3
SDRAM CAS latency Time : 3
: Enabled
: A,C,SCSI
: Disabled
: Enabled
: On
: High
: Fast
: Disabled
: 250
: Setup
: Enabled
Pu/Pd/+/-:Modify
Setup, or just to Setup. The default value is Setup.
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled
: 1
HDD S.M.A.R.T Capability : Disabled
Report NO FDD WIN 95
Video BIOS Shadow
C8000-CBFFF Shadow
CC000-CFFFF Shadow
D0000-D3FFF Shadow
D4000-D7FFF Shadow
D8000-DBFFF Shadow
DC000-DFFFF Shadow
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-2
Auto Detect DIMM/PCI Clk : Enabled
Spread Spectrum Modulated: Disabled
CPU Host/PCI Clock
CPU Warnung Temperature : Disabled
Current System Temp.
Current CPU Temperature : 34C/93F
Current CPUFAN Speed : 0 RPM
17
Only for 9BXAS,9BXAN
: Disabled
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Default
: 44C/111F