Chipset Features Setup - JETWAY 993BSR4A User Manual

Select the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY menu allows user
to change system related parameters in the displayed menu.
manufacturer's default values of this mainboard. Again, user can move the cursor by pressing
direction keys and <PgDn> of <PgUp> keys to modify the parameters. Pressing [F1] key to
display help message of the selected item.
This setup program also provide 2 convenient ways to load the default parameter data from
BIOS [F6] or CMOS [F7] area if shown data is corrupted. This provides the system a capability
to recover from any possible error.
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking : Enabled
Processor Number Feature : Enabled
Q u ick Power On Self Test : Enabled
Boot Se q u ence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
IDE HDD Block Mode
Gate A20 Option
Memory Parity/ECC Check
Typematic Rate Setting
Typematic Rate (Chars/Sec) : 6
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
Esc: Q u it
F1 : Help
F5 : Old Values (Shift)F2 : Color
NOTE: The Security Option contains "setup" and "system". The "setup" indicates that the password
setting is for CMOS only while the "system" indicates the password setting is for both CMOS
and system boot up procedure.
•
Security Option: This category allows you to limit access to the system and
System: The system will not boot and access to Setup will be denied if the correct
password is not entered at the prompt.
Setup: The system will boot, but access to Setup will be denied if the incorrect password is
entered at the prompt.
NOTE: To disable security, select PASSWORD SETTING at Main Menu and then you will be asked
to enter password. Do not type anything and just press <Enter>, it will disable security. Once
the security is disabled, the system will boot and you can enter Setup freely.

3-3 CHIPSET FEATURES SETUP

ROM PCI/ISA BIOS (2A6LGJ1F)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled
: Enabled
: Enabled
: A,C,SCSI
: Disabled
: Enabled
: On
: Enabled
: Fast
: Disabled
: Disabled
: 250
: Setup
: Disabled
¡ ô ¡ õ ¡ ÷ ¡ ö : Select Item
PU/PD/ + / -:Modify
Setup, or just to Setup. The default value is Setup.
OS Select For DRAM > 64MB : Non-OS2
HDD S.M.A.R.T Capability : Disabled
Video BIOS Shadow
C8000-CBFFF Shadow
CC000-CFFFF Shadow
D0000-D3FFF Shadow
D4000-D7FFF Shadow
D8000-DBFFF Shadow
DC000-DFFFF Shadow
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-2
17
This menu shows all of the
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled