Standard Cmos Setup - JETWAY 993AN User Manual

3-1 STANDARD CMOS SETUP

STANDARD CMOS SETUP (Figure 3-2) allows user to configure system setting such as current
date and time, type of hard disk drive installed in the system, floppy drive type, and the type of
display monitor. Memory size is auto-detected by the BIOS and displayed for your reference.
When a field is highlighted (direction keys to move cursor and <Enter> key to select), the entries
in the field will be changed by pressing <PgDn> or <PgUp> keys or user can enter new data
directly from the keyboard.
Date (mm:dd:yy) : Wed, Sep, 10 1997
Time (hh:mm:ss) : 10 : 33 : 52
HARD DISKS
Primary Master
Primary Slave
Secondary Master : Auto
Secondary Slave
Drive A : 1.4M , 3.25 in.
Drive B : None
Video
Halt On : All Errors
Esc : Quit
F1 : Help
NOTE: If hard disk Primary Master/Slave and Secondary Master/Slave were
hard disk size and model will be auto-detect on display during POST.
NOTE: The "Halt On:" field is to determine when to halt the system by the BIOS is error occurred
during POST.
ROM PCI/ISA BIOS (2A6LGJ1F)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
TYPE SIZE
: Auto
: Auto
: Auto
: EGA/VGA
↑↓→← : Select Item
(Shift)F2: Change Color
CYLS HEAD PRECOMP
0 0 0
0 0 0
0 0 0
0 0 0
Base
Extended
Other
Total Memory :
Figure 3-2
19
LANDZ SECTOR MODE
0 0 0 Auto
0 0 0 Auto
0 0 0 Auto
0 0 0 Auto
Memory : 640K
Memory : 7168K
Memory : 384K
8192K
Pu/Pd/+/- : Modify
used Auto, than the