JETWAY 993AN User Manual page 12

Heatsink Attachment
Step 1
Remove the protective liner from the thermal interface
material on the underside of the heatsink.
This liner is not normally present on the Intel reference
active heatsink.
Step 2
Orient the heatsink with the keyed edge of
heatsink along the cam box side of the
processor.
The clip should be oriented so that the thumb tab will
engage on the cam box side of the socket.
Step 3
Seat the heatsink onto the processor and
engage the clip opposite from the cam box onto
its socket tab first.
CAUTION: Do not slide the heatsink once it is
attached to the processor as the thermal interface
material will tear. Instead lift the heatsink off and
reseat it back down onto the processor if required for
proper alignment.
Step 4
Engage the thumb tab side of the clip onto the
cam box socket tab second.
Connect the fan cable to the appropriate header on the
motherboard.
10