Pnp/Pci Configuration Setup; Load Optimal Defaults - JETWAY 993AN User Manual

3-5 PnP/PCI CONFIGURATION SETUP

This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect,
is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses
when communicating with its own special components. This section covers some very technical
items and it is strongly recommended that only experienced users should make any changes to
the default settings.
PNP OS Installed
Resources Controlled By : Manual
Reset Configuration Data: Disabled
IRQ-3
IRQ-4
IRQ-5
IRQ-7
IRQ-9
IRQ-10 assigned to : PCI/ISA PnP
IRQ-11 assigned to : PCI/ISA PnP
IRQ-12 assigned to : PCI/ISA PnP
IRQ-14 assigned to : PCI/ISA PnP
IRQ-15 assigned to : PCI/ISA PnP
DMA-0
DMA-1
DMA-3
DMA-5
DMA-6
DMA-7

3-6 LOAD OPTIMAL DEFAULTS

The "LOAD OPTIMAL DEFAULTS" function loads the system Optimal default data directly from
ROM and initialize associated hardware properly. This function will be necessary only when the
system CMOS data is corrupted.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT
PNP/PCI CONFIGUR
LOAD OPTIMAL DEFAULTS
LOAD STANDARD DEFAULTS
Esc : QUIT
F10 : Save & Exit Setup
ROM PCI/ISA BIOS (2A6LGJ1F)
PNP/PCI CONFIGURATION SETUP
: No
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
assigned to : PCI/ISA PnP
ROM PCI/ISA BIOS (2A6LGJ1F)
Load OPTIMAL Default (Y/N)? Y
Time, Date, Hard Disk Type ...
AWARD SOFTWARE, INC.
CPU to PCI Write Buffer : Enabled
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
PCI#2 Access #1 Retry
AGP Master 1 WS Write
AGP Master 0 WS Read
Assign IRQ For USB
Assign IRQ For VGA
Esc: Quit
F1 : Help
F5 : Old Values
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-5
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
↑↓→← : Select Item
(Shift) F2 : Change Color
Figure 3-6
24
: Enabled
: Enabled
: Disabled
: Disabled
: Enabled
: Disabled
: Enabled
: Enabled
↑↓→←: Select Item
Pu/Pd/+/-:Modify
(Shift)F2 : Color
TECTION
ORMAT