Audio Source Connections - VINCENT SA-93 PLUS Instructions For Use Manual

Stereo control amplifier
Hide thumbs Also See for SA-93 PLUS:
Table of Contents

Advertisement

Available languages

Available languages

To provide your audio system with the input
signals (from CD-Players, Tuners etc.) connect their
stereo audio outputs to the inputs of this pre-ampli-
fier using RCA and XLR connections. The output
connectors of your source devices are mostly
named "Output", "Audio Out", "Front OUT" or
"Line OUT".
Inputs „Line1" to „Line 5" represent standard high
level audio inputs.
1
LINE OUT
1
BALANCE
AUDIO OUT
U T PUT
BALANCE
LINE5
LINE4
I N P U T
CONNECTION TO A RECORDING DEVICE
If that is desired you can connect a recording
device like a CD-Recorder or a tape recorder to the
preamplifier's „REC Output" RCA connectors.
It delivers the unchanged, fixed level (line level) of
the source device that is connected to the
SA-93Plus and currently selected. This output level
is independent from the volume and mute settings.
Recording device:
CD recorder, tape recorder etc.
1
AUDIO IN
BALANCE
LINE5
LINE4
I N P U T
Vincent
26

AUDIO SOURCE CONNECTIONS

LINE3
LINE2
LINE1
REC
1
2
OUTP UT
O UTP UT
LINE3
LINE2
LINE1
REC
1
2
OUTP UT
O UTP UT
The „balanced" input can only be connected to a
device equipped with symmetrical output. At the
source device you can recognize it by the three-
pin XLR-type of the output jack. Leave the XLR input
of your pre-amplifier open if none of your audio
sources uses this. Sometimes both types of output
connectors are provided.
For utilization of a record player mostly a separa-
te phono pre-amplifier is needed. It must be situa-
ted in the signal path between record player and
pre-amplifier high level input. Most types are RCA-
connected. Some models integrate this small
amplifier unit and can be connected directly to the
pre-amplifier.
For more information see manuals of the source
devices to be connected.
BALANCE
Connect this signal output of the preamplifier (REC
Output) using RCA cables to the signal input
(„Record" or „Input") of the recording device.
It is possible to connect other types of audio devi-
ces (mixing desk, Personal Computer).
Note: The signal of the „balanced"
input (XLR) is not avalilable for
recording at the REC Output!
BALANCE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sa-93plus

Table of Contents