Security Precautions - VINCENT SA-93 PLUS Instructions For Use Manual

This product has been designed and manufactured under strict
quality and safety standards to meet all effective international
security regulations. However, you should consider the following
security precautions to avoid unnecessary harms:
Maintenance/Changes
All devices connected to the power supply may be
dangerous to the user when used improperly. Do not
attempt to service this product yourself. Refer ser-
vicing to qualified personal only. This product must
not be changed or reconstructed! This product
should be operated only from a power source
providing 230Volts / 50Hz AC. The power outlet
must be compatible to the safety plug. Use this
audio component only indoors.
Main Supply/Connection
Always pull the plug and never at the cable when
separating the power cord from the power line.
Make sure the power cable is not being squeezed,
bent unnaturally or cut by sharp edges. Do not touch
the cable with wet hands. Use the provided power
cable or other ones offered by Vincent. After failure
replace the fuse only by one of the same type. You
will find the needed values near the fuse housing
at the rear panel. When failing repeatedly, the
device must be checked by a service technician.
Humidity/Heat and Vibrations
The contact with moisture, liquids, rain or steam is
a danger for all electrically powered devices and
their users. Dangerous high voltages are present
inside the enclosure. To reduce the risk of fire or
electric shock, exposition of the appliance to those
should be avoided. If that happened accidentally,
the appliance must be separated from the power
outlet and checked by a service technician.
Never allow objects of any kind or liquids to get
inside this product, through openings, as they may
touch dangerous voltage points or short-out parts
which could result in a fire or electric shock. Do not
Vincent
18

SECURITY PRECAUTIONS

Do not open!
Risc of electric shock! No user servicable parts inside.
use the appliance near water. This product should
be situated away from all heat sources such as
radiators, heat registers, stoves or other products
that produce heat. Do not expose it to direct sun-
light for an extended period. Do not expose the
device to heavy vibrations.
Switch on/off
Always switch off the appliance before, connecting
or separating cable connections with other devices
or loudspeakers, connecting or separating the power
supply connection, leaving the device unused for
an extended period, cleaning of the surface.
After switching off power amplifiers, integrated
amplifiers or receivers wait for ca. 1 minute before
changing cable connections.
Heat development
All amplifiers generate heat. A minimum distance
of 50 mm around the sides and top of the device
is recommended to provide adequate ventilation.
Do not use the appliance in a closed cabinet or
book case.
Volume
The maximum bearable loudness mostly appears
far beneath the maximum volume setting of the
amplifier. So be careful with this setting to avoid
damage to your hearing. To prevent unwanted
high sound level always reduce the volume setting
before changing to another input channel.
Cleaning
Unplug the power cord from the wall outlet before
ON
OFF