Bobbin Winder - Pfaff 1295 Instruction Manual

11

Bobbin winder

.04.16
Requirement
1. With the bobbin winder engaged, drive wheel 1 must be driven reliably.
2. With the bobbin winder disengaged, friction wheel 5 must not run against drive wheel 1.
3. The bobbind winder must switch itself off when the filled thread is about 1 mm from
the rim of the bobbin.
Fig. 11 - 16
Re-position drive wheel 1 (screws 2) according to Requirements 1 and 2.
Re-position pin 3 (screw 4) according to Requirement 3.
1
2
4
3
Adjustment
5
11 - 18