Top Feed Lifting Motion - Pfaff 1295 Instruction Manual

11

Top feed lifting motion

.04.10
Requirement
When lifting presser 1 is resting on the needle plate, vibrating presser 4 and needle point 5
must reach the needle plate at the same time at the highest top feed stroke.
1
Fig. 11 - 10
Lower lifting presser 1 onto the needle plate.
Loosen screws 2 just enough to allow eccentric 3 to be turned against a resistance on it
shaft.
Turn eccentric 3 according to Requirement.
Tighten screws 2.
3
2
5
4
Adjustment
11 - 12