Related Manuals for Pfaff 1196
Summary of Contents for Pfaff 1196
- Page 1 1196, 1197 1199 Compaci 1209 Compac Instruction Book PFAFF-HAN DELSGESELLSCHAFT für Haushaltnähmaschinen m.b.H. Subject to ajterations in design 7500 Karsruhe 41 West-Germany Nr 21992 Wi 0279 engI...
- Page 2 ‘•IILJ ‘..‘...
-
Page 3: Table Of Contents
Model 1196/1197 Models 11 96 (A>, 11 97 (B) Press down catches A (marked by arrows> Remove this receptacle from the machine. and swing them outwards. Then lift the Before you put the machine away after sewing, replace the receptacle in its cover off, To replace the cover, reverse this sequence. -
Page 4: Removing The Carrying Case Cover, 1 196/1197
Foot control receptacle Removing the carrying case cover, Accessories drawer, Model 1199/1209 Jll.C shows how the accessories are to be Model 1199/1209 Models 11 99/1209 On the Compact models the accessories placed in the drawer. On the Compact models the carrying case Remove the receptacle from the machine. -
Page 6: Bobbin Winding
Bobbin winding Inserting the bobbin Upper threading Inserting the bobbin case Disengage the sewing mechanism. Raise Insert the filled bobbin into the bobbin case Pull the thread from the spool and draw it Lift latch K and push the bobbin case onto pins 5. -
Page 8: Thread Cutter
Ultra-Matic stitch selector (9) Zigzag stitch Thread cutter, Model 1209 Thread cutter, Models 1196/1199 Turn the outer ring until the symbol of the Setting mark The thread cutter is located at the back of There is a sharp-edged slot on the back of straight or zigzag stitch desired is Zigzag stitches are sewn in the ranges the presser bar which serves as a thread... -
Page 9: Needle Position
Reverse sewing and dropping Presser bar lifter Dual feed, Model 1209 Needle position Lever 1 8 has two positions: This additional feed prevents one ply from The needle can be set to different positions the feed dog Sewing foot raised, (Before you creeping ahead of the other. -
Page 10: Changing The Needle
Upper tension (16) The correct lower tension Changing the needle Changing the sewing foot Setting mark. The normal tension Let the bobbin case with a full bobbin Raise the needle bar. Then hold the Raise the needle bar. Loosen screw A until setting is in the green range hang down freely by the thread. -
Page 11: Utility Stitches
Utility stitches Utility-stitch Utility-stitch combinations setting A Elastic stitch Pushing two buttons simultaneously The setting of Ultra-Matic stitch selector IV E stitch B Blindstitch produces new utility-stitch patterns. 9/10 which is required for a specific utility Setting: buttons B+C, straight stitch 0, C Elastic triple straight stitch Honeycomb stitch stitch is indicated on the buttons. -
Page 13: Sewing Feet
E Zipper or edge-stitching foot with edge The special accessories listed below are intended for special sewing jobs. They can be guide 1196—1199 obtained from your Pfaff dealer. Blindstitch foot Normal sewing foot, Model 1 209; G Hemmer foot for all sewing operations requiring no H Darning foot;... -
Page 14: Changing The Light Bulb
Threading the needle 1209 Changing the light bulb Cleaning and oiling Turn the balance wheel toward you to raise Push the light bulb up, turn it toward A and 11 96: Remove cover 1 5. Pull needle plate the needle and take-up lever 1 (see drawing). pull it out.