Adjustment
11
Adjustment
11.
Tools, gauges and other equipment for adjusting
01
11.
Notes on adjustment
02
All adjustments in this instruction manual refer to a completely assembled machine and
must only be carried out by appropriately trained technical personnel. Machine covers that
have to be removed and replaced for checks and adjustment work are not mentioned in the
text.
The screws and nuts indicated in brackets () are for the fixation of machine parts that have
to be unscrewed before adjustment and tightened again afterwards.
11.
Abbreviations
03
t.d.c. = top dead centre
b.d.c. = bottom dead centre
11 - 1
For the adjustments in this chapter the PFAFF 1296 two-needle machine is
illustrated. On the PFAFF 1295 single-needle machines various adjustments
only have to be carried out on one side, i.e. in the right-hand hook area. This is
referred to in the different chapters.
Screwdrivers withi blade widths from 2 to 10 mm
Spanners (wrenches) in sizes from 7 to 14 mm
Allen keys from 2 to 6 mm
Metal rule (part No. 08-880218-00)
Needle-rise gauge (part No. 61-111600-01)
Screw clamp (part No. 61-111600-35/001)
Needles, system 134-35
Sewing thread and material for stitching off