7
Feed regulator/reverse sewing
.07
Fig. 7 - 07
7.
Feed regulator (on machines with subclass -911/97)
08
Fig. 7 - 08
0
1
2
3
1
2
1
The stitch length is adjusted by turning
the knurled nut on lever 1.
To reverse the sewing direction press
lever 1 fully upwards.
Turn knurled screw 1 to adjust the stitch
length for sewing forwards.
Turn knurled screw 2 to adjust the stitch
length for sewing backwards.
Reverse stitches can be set as
long as required, independently
of forward stitches.
For adjustment of automatic
start- and finish backtacks
please refer to the instruction
book of the motor
manufacturer.
Controls
7 - 4