Setting up
9
Inserting the needles on the PFAFF 1296
.02
9 - 2
2
Fig. 9 - 02
The choice of needle depends on the version of the machine and the sewing
thread and material in use (see Chapter 3, Specifications).
Only use needles of system 134-35.
Set needle bar at top position and loosen
screws 1.
Push needles 2 fully in (the long groove
of the left needle must face to the right
and that of the right needle to the left).
Tighten screws 1 again.
1
Switch off the machine!
Danger of injury due to
unintentional starting of the
machine!