Connecting The Adapter For Free Arm Embroidery - Bernina Artista 730E Instruction Manual

Connecting the Adapter for Free Arm Embroidery

200
The Embroidery Computer – Attaching the Embroidery Module
The adapter is used for embroidering tubular items
(sleeves, trousers, infant items, socks, etc.) on the
free arm of the sewing computer.
Attaching the Adapter to the Sewing Computer
push the adapter behind the free arm towards the
sewing computer so that the connecting lugs
engage in the base plate of the sewing computer
Attaching the Module to the Adapter
place the module on the adapter with the front
edge of the module as close as possible to the
L-shaped guide on the adapter
push the module towards the guide from the left
until the connecting lugs engage in the base plate
of the adapter
Free Arm Embroidery Hoop
the small, oval embroidery hoop is specially
•
designed for free arm embroidery
Caution!
Only the small hoop can be used for
free arm embroidery.
Removing the Adapter
remove the module from the adapter
the rear right corner of the adapter is designed
to be used as a grip
hold the adapter with this grip and remove from
the base plate of the sewing computer