Embroidery Preparation
Overview embroidery functions
1
2
3
Centering the embroidery hoop to the needle
Relocating the embroidery hoop facilitates threading when the needle is close to the embroidery hoop.
> Tap «Hoop Indicator/Select Hoop».
> Tap «Centering the Needle to the Embroidery Hoop».
P
> Thread the upper thread.
> To move the hoop back to its previous position, push the button «Start/Stop».
Moving the hoop to the back
To facilitate changing the bobbin, it is recommended to move the hoop to the back before threading. This
makes it easier to open the bobbin cover.
> Tap «Hoop Indicator/Select Hoop».
> Tap «Move Hoop to the Back».
P
> Thread the bobbin thread. (see page 41)
> To move the hoop back to its previous position, push the button «Start/Stop». If available, pull the upper
Moving the embroidery arm to the left
> Tap «Hoop Indicator/Select Hoop».
> Remove the embroidery hoop.
> Tap «Move Hoop to the Left».
P
> Tap «Confirm».
48
«Centering the Needle to the Embroidery
Hoop»
«Move Hoop to the Back»
«Move Hoop to the Left»
thread back.
– An animation «Remove the Embroidery Hoop» appears.
– The embroidery arm moves to the left into the parking position.
1
2
3
4
5
6
4
«Grid On/Off»
5
«Center of Embroidery Design»
6
«Virtual Positioning»