Accessory Box - Bernina Artista 730E Instruction Manual

Accessories*
The following accessories are arranged separately
in the styrofoam packing or later in the suitcase
system (special accessory):
foot control
•
instruction manual
•
power cable
•
warranty card
•
FHS presser foot lifter (Free Hand System)
•
slide-on table
•
seam guide for slide-on table
•
Seasons of Artistry
•
Instructional / Presentation CD-ROM
•
Design / Tutorial USB-Stick
•
BSR System
•
Carrier Bag
•
Touch Screen Stylo
•
for more information for Instructional / Presen-
•
tation CD-ROM see page 194

Accessory Box

Storing Accessories
set up the free standing accessory box by pulling both extensions
out until they click into place
Both accessory boxes are equipped with one small and one large
drawer each as well as two compartments for bobbins, two
compartments for coded presser feet and one compartment for
non-coded presser feet.
The compartments can be stored in the box (additional
compartments and drawers are available as optional extras).
insert the bobbins into the compartments provided
to remove a bobbin, press the compartment holder A lightly
hang presser feet in the compartments provided
store the remaining accessories as shown in the picture
Suitcase System (special accessory)
The suitcase system is specially built for your sewing and embroidery
computer and has integrated wheels. This allows your system to be
transported easily and elegantly.
for more information see page 262
•
10
The Sewing Computer – Setting up the Sewing Computer
Carrier Bag
protects from dust and dirt
•
this bag can be used to transport the sewing
computer. The accessories can be stored in the
corresponding compartments
••••••••••••••••
A
•••••••••••••••••••••••••••
Standard Accessories*
four bobbins
•
(+ one in bobbin case)
selection of 130/705 H needles
•
seam ripper
•
small screwdriver
•
angular Torx key
•
lint brush
•
seam guide
•
2 foam pads
•
Reverse pattern foot No. 1C
•
Overlock foot No. 2A
•
Buttonhole foot with code No. 3C
•
Automatic buttonhole foot No. 3A
•
Zipper foot No. 4
•
Blind stitch foot No. 5
•
Jeans foot No. 8
•
Button sew-on foot No. 18
•
Open embroidery foot No. 20C
•
Sideways motion foot No. 40C
•
Compensation plate for sewing
•
buttonholes
height compensating tool
•
three spool discs
•
oiler
•
USB Cable
•
*(can vary from country to country)