Selecting the Embroidery Hoop
Attaching the Embroidery Hoop
Starting to
Embroider
Embroidering Motifs
204
The Embroidery Computer – Starting to Embroider
Screen Edit 1
select an embroidery motif from the various choices of motifs
the screen «Edit 1» appears
•
the selected embroidery motif is shown in the most
•
appropriate (smallest possible) hoop
the «Hoop» on-screen button shows which
•
hoop should be attached
attach the recommended hoop
Raising Needle and Embroidery Presser Foot
raise needle and embroidery presser foot
hold the hoop with the right side of the fabric
up and the attaching mechanism to the left
touch «OK» in the screen Edit 1 or press the
Quick Reverse button on head frame
embroidery computer moves to check if hoop is
•
attached
Embroidery Menu (Ready)
the Embroidery menu (Ready) opens with the
•
embroidery motif
the embroidery motif is ready to be embroidered
•
Note:
The last selected embroidery
motif is always positioned in the
center of the hoop.
Attaching the Hoop
pass the hoop under the embroidery
presser foot
squeeze the ends of the attaching
mechanism on the side of the hoop
position the center points of the
hoop (small attachment clamps) over
the bracket of the embroidery arm
push the hoop down until it engages
release the attaching mechanism of
the hoop
Removing the Hoop
press both ends on the hoop
attaching mechanism towards each
other
pull up to remove the hoop