Mirroring Motifs; Altering Motifs - Bernina Artista 730E Instruction Manual

Checking the Motif Position
With the functions «Check» and «Motif Center» the motif position can be
checked before embroidering.
Check
The function «Check» reads the attached hoop size and stitching area:
touch symbol
the hoop size is read causing the hoop to move
•
«Check» then confirms placement by moving hoop to reflect stitching area
of selected motif
«Check» moves hoop 4 steps so that stitching area of selected motif can
be confirmed
hoop moves to lower left corner
•
hoop moves to lower right corner
•
hoop moves to upper right corner
•
hoop moves to upper left corner
•
confirm each position by touching «OK»
if no hoop or a too small hoop was attached, an error message will appear
•
Checking Motif Center
touch symbol
the exact center of the motif is indicated on the display
•
the hoop will be moved until the needle is in the center of the motif
•
touch symbol again and on the display the first stitch of the motif will be
marked once more

Altering Motifs

Mirroring Motifs

Each motif can be mirrored left/right or up/down.
Preparation
select desired motif from the Selection menu
motif appears in the screen Edit 1
•
use the «To Next Page» symbol to change to the screen Edit 2
Mirroring Motifs Horizontally (left/right)
touch symbol «Horizontal Mirror Image (left/right)»
the motif will be mirrored horizontally
•
227
Embroidery - Motifs