Beeper (Acoustic Signal) Deactivation/Activation
Activating the BSR Sewing Function:
With the Foot Control
1. With the Foot Control
plug in the foot control
•
lower the presser foot
•
start the BSR mode by pressing the foot control
•
a red light appears on the presser foot
•
the foot control must be pressed continuously
•
during sewing
the speed of the sewing computer will be regu-
•
lated by the movement of the fabric
by releasing the foot control the BSR mode will
•
be stopped
2. With the Quick Reverse Button
remove the foot control
•
lower the presser foot
•
start the BSR mode by pressing the Quick
•
Reverse button
Beeper Deactivation/Activation
• touch the bar with the speaker symbol for BSR one time
• if the bar is blue, the sound for the beeper is active
• if the bar is gray and the speaker is red, the sound for the
beeper is inactive
a red light appears on the presser foot
•
the speed of the sewing computer will be regu-
•
lated by the movement of the fabric
by re-pressing the Quick Reverse button the BSR
•
mode will be stopped
Deactivating the BSR Sewing Function:
Mode 1:
if the fabric is not moved for approx. 7 seconds,
•
the BSR mode will be deactived and the red light
on the presser foot goes off
Mode 2:
if the stitching process is ended by no longer
•
moving the fabric, one additional stitch is made
depending on the needle position. The sewing
computer always stops with the needle up, even
if the arrow on the display points down
Holding the Work
hold and guide the taut fabric with both hands
•
abrupt movements of the fabric (slowing down,
•
speeding up respectively) can result in slightly
too short or too long stiches
continuous movement of the fabric (no abrupt
•
movements) under the foot will provide best
results
move the fabric in one direction for best results
•
Application Example:
BSR With Zig-zag Stitch No. 2
the zig-zag stitch can be used for thread pain-
•
ting or fabric embellishment for example
areas can be filled and forms or pictures created
•
BSR Function Deactivation
pull out the plug of the BSR presser foot connec-
•
tion cable on the sewing computer. The pre-
viously selected stitch is active again
remove the BSR foot
•
Quilt Stitches – Applications
151