Hardware; Reset To Factory - Bernina Artista 730E Instruction Manual

Hardware

Reset to Factory

Opening Setup Program
press the external Setup button
menu appears
•
touch «Hardware»
the screen «SSID» appears
•
SSID (Service Set Identifier)
touch SSID bar
a screen with a keyboard appears
•
enter SSID from your access point
only necessary with a wireless appli-
•
cation
Opening Setup Program
press the external Setup button
menu appears
•
touch «Reset to Factory»
a summary of the screen «Reset to Factory» appears
•
Reset to Factory
three choices are possible:
•
Sewing
•
Embroidery
•
All
•
touch the on-screen button which you want to «Reset to
Factory»
Saving and Closing
touch «OK»
changes are saved, the screen closes and the
•
menu appears
Closing Screen
touch «ESC»
the screen display closes, the original settings
•
remain saved and the menu appears
Note:
If stock embroidery designs that came with the sewing
computer are deleted, use the enclosed USB data stick to
reload them to the sewing computer.
175
Setup Program