Attaching The Embroidery Module - Bernina Artista 730E Instruction Manual

Attaching the Module to the Sewing Computer
Caution!
When connecting the embroidery
module and/or the free-arm adapter,
attention must be paid that all
items are on a flat and even surface!
Attaching the Module to the Sewing
Computer
place the module on the sewing computer behind
the free arm
push the module from the left towards the
sewing computer so that the connecting lugs
engage in the base plate
Releasing the Cable
the cable connects the module to the sewing
•
computer
pull the cable out of the holder on the back of
the module
Attaching the
Embroidery Module
Connecting the Cable
plug with flat side to the front
insert the plug into the socket on the right hand
side of the sewing computer (look for symbol)
Releasing the Cable
pull out the plug
Storing the Cable on the Module
insert the cable into both cable holders
press cable gently to secure
Removing the Module
grip the back right corner to lift the module and
remove to the left
Caution!
Always separate the module and
sewing computer for transportation.
Never transport them attached.
The Embroidery Computer – Attaching the Embroidery Module
199