Ribbing Finish - Bernina Artista 730E Instruction Manual

Ribbing Finish

Ribbing
decorative and very practical way of finishing the
•
edges
suitable for sweatshirts, pajamas – either way, etc.
•
Cutting
width: twice the finished width plus double the
seam allowance
length: desired length plus double the seam
allowance
check length by putting the ribbing folded in half
around neck, waist, wrist, or ankle (check whether
ribbing around the neck is wide enough to be
pulled over the head)
Preparation / Sewing
make a circle out of the ribbing and sew
according to seam allowance (chose suitable
overlock stitch according to fabric)
fold the ribbing in half, the seam to inside (baste
edges)
divide ribbing in four equal sections and mark
quarters (mark No. 1 is the seam)
divide edge of the garment also in four equal
sections and mark quarters
pin right side of ribbing to right side of garment,
the four marks matching. The ribbing seam should
be placed to the back or on shoulder seam
sew with a machine overlock stitch (according to
fabric)
TIP
Using ready-made ribbing
The job is made easier as there is no cutting.
Practical Stitches – Applications
61