Print Settings For Gl/2 & Tiff; Adjusting The Print Settings For Gl/2 & Tiff - Ricoh Aficio SP W2470 Software Manual

Print Settings for GL/2 & TIFF
This section explains the GL/2 & TIFF settings that you can set using the control
panel. GL/2 & TIFF settings are applied to GL/2 and TIFF files printed from
Web Printing Tool and the printing commands.
❖ Priority of Settings
• Settings changed using the control panel take priority.
• You cannot change GL/2 & TIFF initial configuration made using Web
Printing Tool, if the setting was changed using the control panel and is cur-
rently in effect.
• GL/2 & TIFF is ineffective during the printing of GL/2 files using the HDI
driver. Settings made using an application have priority over GL/2 & TIFF
settings.
Note
❒ The settings are the same for both Web Printing Tool and the control panel.
❒ For details about making settings using Web Printing Tool, see Web Print-
ing Tool Help.
Adjusting the Print Settings for GL/2 & TIFF
A
Press the {Menu} key.
B
Press the {U} or {T} key to select [Extended Features], and then.press the
{OK} key.
C
Check [GL/2 & TIFF] is selected, and then press the {OK} key.
BAL051S
Print Settings for GL/2 & TIFF
5
159