Using As The Windows Network Printer; Installing The Rpcs Printer Driver - Ricoh Aficio SP W2470 Software Manual

Using as the Windows Network Printer

Installing the RPCS Printer Driver

To use the print server, install the printer driver by selecting "Network printer
server", and then select the Windows 2000/XP, or Windows Server 2003/2003
R2 shared printer.
This section assumes that the client has already been configured to communicate
with a Windows 2000/XP, or Windows Server 2003/2003 R2 print server. Do not
begin the following procedure before the client is set up and configured correctly.
Important
❒ To install printer driver under Windows 2000/XP and Windows Server
2003/2003 R2, you must have an account that has Manage Printers permis-
sion. For this, log on as an Administrators or Power Users group member.
❒ If you print with a print server connected to the printer using the SmartDe-
viceMonitor port, Recovery Printing and Parallel Printing cannot be used
from the client.
❒ SmartDeviceMonitor's notification functions are not available if you are us-
ing a Windows XP or Windows Server 2003/2003 R2 print server.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [RPCS Printer Driver].
E
The software license agreement appears in the [License Agreement] dialog
box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
F
Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G
Click [Next >].
H
Select the printer models you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I
Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
Using as the Windows Network Printer
1
37