Connecting The Multi Zone Terminals; Zone2 Out Connections; Zone2 Speaker Out Connections - Denon AVR-1907 Operating Instructions Manual

ENGLISH
Connecting Other Sources

Connecting the MULTI ZONE terminals

For instructions on operations using the MULTI ZONE functions (

ZONE2 out connections

• When the power amplifier is assigned to the ZONE2 output channel at "Power Amp Assignment" in the
"System Setup" menu, the surround back pre-out terminals can be used as the ZONE2 pre-out out
terminals ( page 53).
• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 out (variable/fixed
level) terminals can be used to play a different program source in ZONE2 the same time (
40).
• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and
connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE
can be controlled from ZONE2 using the remote control unit.
Extension terminal for future use.
NOTE:
• For instructions on installation and operation of separately sold devices, refer to the devices'
operating instructions.
page 39 ~ 41).
Power amplifier
(ZONE2)
A
(Variable)
L
L L
IN
R R R
Premain amplifier
(ZONE2)
A
(Fixed)
L
L L
IN
R R
R
RC-617 INFRARED SENSOR
+
+
AUX OUT
RC-616 INFRARED
RETRANSMITTER

ZONE2 speaker out connections

• When the power amplifier is assigned to the ZONE2 output channel at "Power Amp Assignment" in the
"System Setup" menu, the surround back speaker terminals can be used as the ZONE2 speaker out
terminals ( page 53).
• The connections diagram below is an example for when the surround back speaker is assigned to the
ZONE2 stereo 2 channel.
In this case, surround back speaker out can not be used for MAIN ZONE.
Center
speaker
page 39,
> <
OUTPUT
INPUT
( L ) ( R )
< > > <
Front speakers
(B)
19
ENGLISH
Connecting Other Sources
Surround
Subwoofer speakers
Connection terminal for
subwoofer with built-in
amplifier.
( L )
IN
> < >
( L )
( L ) ( R )
< > > <
> < >
Front speakers ZONE2
(A) Front speakers
The settings must be changed
to use this speaker for ZONE2
( page 53).
ZONE2
( R )
<
( R )
<