Selecting The Dsp Surround Simulation - Denon AVR-1907 Operating Instructions Manual

ENGLISH
Basic Operation
<SURROUND MODE>,
SURROUND PARAMETER
[CH SELECT],
ENTER
[5CH/7CH STEREO]
D H F G
ENTER
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Selecting the DSP surround simulation

F G, SELECT/ENTER
¢ To operate the surround mode and the surround
parameters from the remote control unit
1
[DSP SIMULATION]
Press
5CH/7CH STEREO
VIRTUAL
D H
MATRIX
The 5CH/7CH STEREO mode can be selected directly by pressing
[5CH/7CH STEREO].
2
SURROUND PARAMETER
Press
D H F G
3
D D H H
Press
SB CH OUT
• ON:
Surround back channel played.
• OFF:
Surround back channel not played.
[DSP SIMULATION]
ROOM SIZE:
SURROUND
Adjust the imaginary size of the recreated sound field space. (Does
PARAMETER
not express size of room in which played.)
There are five parameters: "small", "med.s", "medium", "med.l"
and "large".
EFFECT LEVEL:
Adjust the strength of the surround effect.
DELAY TIME: (MATRIX mode only)
Adjust the delay time between "0 ms" and "110 ms".
4
ENTER
Press
.
MONO MOVIE
ROCK ARENA
VIDEO GAME JAZZ CLUB
.
F F G G
to select the item, then press to set.
SURROUND PARAMETER
or .
31
ENGLISH
• Select "Default Yes" and press F F to reset all the settings.
¢ Operating the surround mode and the surround
parameters from the main unit's panel
1 < SELECT /ENTER >
Use to select the surround mode.
DIRECT STEREO DOLBY PRO LOGIC
5CH/7CH STEREO NEURAL SURROUND
MONO MOVIE ROCK ARENA
VIRTUAL SURROUND MATRIX
To select the surround mode while adjusting the surround
parameters, tone defeat or tone control, press < SURROUND MODE > ,
then operate the selector.
2
Perform steps 2 to 4 under "Selecting the DSP surround
simulation".
Basic Operation
II x
DTS NEO:6
JAZZ CLUB
VIDEO GAME