Listening To The Radio; Auto Preset Memory; Auto Tuning; Manual Tuning - Denon AVR-1907 Operating Instructions Manual

ENGLISH
Basic Operation
<POWER> CHANNEL
<FUNCTION> BAND
<ON/STANDBY> SHIFT <PRESET
SHIFT
[FM/AM]
[ON SCREEN]
TUNING
[MODE]
BAND
[MEMORY]
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Listening to the radio

TUNING Check that the remote control unit is set to "AUDIO".

Auto preset memory

This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the preset memory.
1
Switch off the unit using
>
•
2
Hold
• The unit automatically begins searching for FM broadcast
stations.
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
CHANNEL
Subsequent stations are automatically stored in order at preset
channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory operation is
completed.
• If an FM station cannot be preset automatically due to poor reception,
use the "Manual tuning" operation to tune in the station, then preset
it using the manual "Preset memory" operation.
• To interrupt this function, press < ON/STANDBY > .
[TUNER]
< POWER >
.
< PRESET • > < POWER >
and press .
33
ENGLISH

Auto tuning

1 < FUNCTION >
Use to select "TUNER" or press
[TUNER]
.
2
BAND
Press to select "AM", "FM" or "XM".
When listening to the XM Satellite Radio (
3
[MODE]
Press to set the auto tuning mode.
• The "AUTO" indicator lights.
4
TUNING
Press .
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the "Manual
tuning" operation.
• "AM" or "FM" can be selected directly by pressing [FM/AM].

Manual tuning

1 < FUNCTION >
Use to select "TUNER" or press
[TUNER]
.
2
BAND
Press to select "AM", "FM" or "XM".
When listening to the XM Satellite Radio (
3
[MODE]
Press to set the manual tuning mode.
Check that the display's "AUTO" indicator turns off.
4
TUNING
Press .
The frequency changes continuously when the button is held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
• "AM" or "FM" can be selected directly by pressing [FM/AM].
Basic Operation
page 34, 35).
page 34, 35).