Video Setup; Setting The Component In Assignment; Setting The Video Convert; Setting The Audio Delay - Denon AVR-1907 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 1

Video Setup

Setting the Component In Assignment

This assigns the different input sources for the component video input
terminals.
1
D D H H
Press to select "Video Setup", then press
2 D D H H
Press to select "Component In Assign", then
ENTER
press .
3 D D H H
Press to select the input terminals, then press
G G
to set.
DVD/VDP, TV/DBS, VCR, V.AUX:
Assign the different input sources to "COMP1", "COMP2" or
"COMP3".
4
ENTER
Press .
1
2
3
• It is not possible to make the "Component In Assignment" settings
for the function assigned at "iPod Assignment".

Setting the Video Convert

This sets whether or not to use the video conversion function.
1
D D H H
Press to select "Video Convert", then press
2 D D H H
Press to select the input source, then press
ENTER
.
to set.
ON, OFF:
Select "ON" to use the video conversion function, "OFF" if you do
not want to use it.
F F
3
ENTER
Press .
1
• Down-converting from the component video signal to the S-Video
and composite video signal is not possible, so when not using the
component video monitor output terminal connect the player using
the S-Video or composite video input terminal (
• When a non-standard video signal from a game machine or some
other source is input, the video conversion function might not
operate. If this happens, please set the conversion mode to "OFF".
• When the video conversion function has been used, information
such as that of text broadcasts which has been added to the video
signal might not be output. If this happens, please set the conversion
mode to "OFF".
ENGLISH

Setting the Audio Delay

Adjust the time delay between the video and audio signals.
1
ENTER
.
F F G G 2
0 ms ~ 200 ms:
Adjust the time delay.
With a movie source, for example, adjust so that the movement
of the actors' lips is synchronized with the sound.
3
2
• By default, this menu is not displayed when no digital signals are
being input.
page 14).
• To make this setting for the component video signal, select the
delay time and turn the on screen display off, then check that the
timing of the component video and audio match.
• The audio delay setting does not apply when playing in the EXT. IN
mode or in the analog input direct mode or stereo mode (Front
speaker setting "Large" and TONE DEFEAT "ON").
51
Advanced Setup – Part 1
D D H H
Press to select "Audio Delay", then press
F F G G
Press to set.
ENTER
Press .
1
2
ENTER
.