Connecting The Multi Zone Terminals; Connecting A Room-To-Room Remote Control Unit - Denon AVR-1706 Operating Instructions Manual

Connecting Other Sources
2 AM loop antenna assembly
Connect to the AM
antenna terminals.
1 2
3
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. Antenna placed on
a stable surface.
Mount
b. Hanging the
antenna on a wall.
Use the
installation hole to secure the antenna to a wall, etc.
Note to CATV system installer:
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC which provides guidelines for
proper grounding and, in particular, specifies
that the cable ground shall be connected to
the grounding system of the building, as
close to the point of cable entry as practical.
Connection of AM antennas
1. Push the lever.
2. Insert the conductor.
3. Return the lever.
NOTE:
• Do not connect two FM antennas
simultaneously.
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure the AM loop antenna lead
terminals do not touch metal parts of the
panel.

Connecting the MULTI ZONE terminals

For instructions on operations using the MULTI ZONE functions (

Connecting a room-to-room remote control unit

When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired
and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN
ZONE can be controlled from ZONE2 using the remote control unit.
Extension terminals for future use.
NOTE:
• For instructions on installation and operation of separately sold devices, refer to the devices'
operating instructions.
14
ENGLISH
ENGLISH
Connecting Other Sources
page 35, 36).
RC-617 INFRARED SENSOR
+ OUTPUT
+ INPUT
AUX OUT
RC-616 INFRARED
RETRANSMITTER