Connecting A Dvd Player And Monitor - Denon AVR-1907 Operating Instructions Manual

ENGLISH
Easy Setup Procedure

Connecting a DVD player and monitor

• To connect the video output from the DVD player to the AVR-1907, you only need to choose one
connection type. For more information about the video up conversion function (
• To connect the digital audio output from the DVD player, you can choose from either the coaxial or
optical connections. If you choose to use the coaxial connection, it needs to be assigned. For more
information about Digital Input Assignment (
Audio signal flow is shown with white arrows, video signal flow is shown with gray arrows.
• The AVR-1907 is equipped with another set of input terminals for a non-DVD video disc player (such as
laser disc, VCD/SVCD, or future high definition disc player). The above connection guidelines for DVD
also apply to the VDP input.
page 14).
page 47).
DVD player
COMPONENT VIDEO OUT
H
Y
P
B
P
R
G
S VIDEO
F
VIDEO
D
OPTICAL
A AUDIO OUT
L
L L
R R R
• For best picture quality (especially with progressive DVD and other high definition sources), choose the
component video connection to your monitor. S-Video and composite video outputs are also provided if
your monitor does not have component video inputs.
OUT
OUT
• The component video input and/or output terminals may be labelled differently on some monitors or
video components. Check the owner's manuals for other components for further information.
OUT
9
ENGLISH
Easy Setup Procedure
Monitor
COMPONENT VIDEO IN
H
Y
P
B
P
R
G
S VIDEO
IN
F
VIDEO
IN