Denon AVR-590 Owner's Manual page 34

ENGLISH
Changing the Input Sources Assigned to the Input Connectors
(Assign)
Setting items
Input Assign (HDMI)
HDMI
Assign input sources to input
sources are assigned to the HDMI input connectors as shown below.
connectors.
• HDMI1 / HDMI2 / HDMI3
• None : Do not assign an HDMI input connector to the currently selected
input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
source
Default
setting
• When HDMI is assigned to an input source, the audio signal switches
to HDMI along with the video signal. To use with the digital audio
input connectors assigned, set menu "Input Mode" (vpage 32) to
"Digital" .
• When the AVR-590 and TV are connected with an HDMI cable, if the
TV is not compatible with HDMI audio signal playback, only the video
signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the TV.
NOTE
When "HDMI Control" is set to "ON" , HDMI cannot be assigned to "TV"
at the "HDMI" settings (vpage 27).
Input Assign (Digital)
Digital : The DVD
Assign input sources to input
sources are assigned to the digital audio input connectors as shown
connectors.
below.
• C1 (COAXIAL) / O1 (OPT1) / O2 (OPT2)
None ： Do not assign a digital input connector to the currently selected
•
input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input source
Default setting
Input source
Default setting
Remote control

operation buttons
Default settings are underlined.
Setting contents
The DVD HDP TV SAT/CBL VCR
:
DVD HDP TV SAT/CBL VCR
HDMI1 HDMI2 None HDMI3 None
HDP TV SAT/CBL VCR
DVD HDP TV
OPT1
None None
DVR V.AUX
OPT2 None
Displaying the menu
:
Cancel the menu
Setting items
Input Assign (Component)
Assign input sources to input
connectors.
DVR V.AUX input
DVR V.AUX
iPod Dock
None None
Change the input source to
which the control dock for
iPod is assigned.
DVR V.AUX input
SAT/CBL VCR
COAXIAL
None
: Moves the cursor (Up/Down/Left/Right)
Making the input settings (Input Setup)
Setting contents
Component : The DVD HDP TV SAT/CBL
input sources are assigned to the component video input connectors as
shown below.
C OMP1 (Component video 1 input connector) / COMP2 (Component
●
video 2 input connector)
N one : Do not assign the component video input connectors to the currently
●
selected input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
DVD HDP TV SAT/CBL
source
Default
COMP1 None None None
setting
The control dock for iPod can be assigned to the DVD
DVR V.AUX input sources.
:
Assign Assign the currently selected input source to the Control Dock for
iPod input.
:
None Do not assign the currently selected input source to the Control Dock
for iPod input.
• With the default settings, the control dock for iPod can be used
connected to the VCR (iPod) connector.
• Even if "iPod Dock" is set to "Assign" , if AVR-590 and control dock
for iPod are not connected, the input is used as the normal input
source.
: Return to previous menu
: Decision the setting
VCR DVR V.AUX
VCR DVR V.AUX
None COMP2 None
SAT/CBL VCR