The Soft Row - Lexicon PCM 81 - REV User Manual

Beyond simple ADJUST knob editing, the PCM 81 offers two levels of editing
control, called Go mode and Pro mode. Go mode is designed to be a basic
"plug and play" mode, with easy access to a specific set of preset parameters.
For each of the 300 presets, we have designed a Soft Row containing those
parameters which allow you to make value changes to the effect without losing
the character of the sound.
When shipped, the PCM 81 will power up in Go mode with the first preset (P0
0.0 Prime Blue) loaded. Press Edit to display the Soft Row of parameters which
have been designed for this preset. In this example, 10 soft row parameters have
been assigned. The name of each Soft Row parameter is displayed, along with
a reference to its row in the Edit matrix.
Turn SELECT to scroll all of the available parameters in the Soft Row. Turn
ADJUST to change the value of any displayed parameter along its entire range.
Each preset has a Soft Row of parameters which have been
specifically selected to provide everything you need to play with the
effect. This example shows the Soft Row for P0 0.0 Prime Blue.
Turn SELECT to move
horizontally across the
Soft Row.
Use ADJUST to change the
value of a displayed parameter.
An asterisk in front of a displayed parameter
indicates additional parameters are available when
you press Load/ .
The Soft Row display shows:
an Edit matrix row label...
Controls
... and the current parameter value.
The symbol in the upper left
corner of the display indicates
that a modulator is patched as
a "source" controller.
Basic Operation

The Soft Row

Soft Row parameters are derived
from the full Edit matrix (with the
exception of the Patch row). In
the presets, they are arranged
according to their numerical
order in the matrix.
... the name of the parameter...
High Cut
12.50 kHz
The symbol
right corner of the display
indicates that a parameter
is a patch "destination".
in the upper
2-23