Lexicon PCM 81 - REV User Manual page 173

PCM 81 User Guide
Digital Audio Interface
Internal Audio Data Paths
External Memory Card
Control Interface
General
Unless otherwise noted, all audio specifications assume rear-panel switch set to BAL, input level control
is set for unity gain (0dB), and analog I/O connections wired for balanced configuration.
7-2
Connectors: Coaxial, RCA type (2); balanced, XLR (2)
Format: S/PDIF (IEC-958) and AES/EBU (AES3-1992) professional interface
Sample Rates: 44.1 kHz, 48 kHz
Conversion: 20 bits
DSP: 20 to 24 bits
Connector: Accepts PCMCIA Type I cards, 68 pins
Standards: Conforms to PCMCIA 2.0 / JEIDA 4.0
Card Format: Supports up to 1MB SRAM (attribute memory not required)
MIDI: 5-pin DIN connectors provided for MIDI IN, THRU, & OUT
Footswitch: 1/4 inch T/R/S phone jack provided for
2 independent momentary footswitches
System detects normal-open, or normal-closed on power up
Foot controller: 1/4 inch T/R/S phone jack provided for footpedal
(100 minimum, 10k maximum impedance)
Dimensions: 19.0"W x 1.75"H x 12.0"D (483 x 45 x 305 mm)
19 inch rack mount standard, 1U high
Weight: Net: 6.4 lbs (2.9 kg)
Shipping: 9.5 lbs (4.3 kg)
Power
Requirements: 100-240 VAC, 50-60 Hz, 35 W, 3-pin IEC power connector
RFI/ESD: Conforms to FCC Class B,
EN55022 Class B (CE), IEC 801-2, IEC 801-3
Environment: Operating temperature: 32˚ to 104˚F (0˚ to 40˚C)
Storage temperature: -22˚ to 167˚F (-30˚ to 70˚C)
Humidity: maximum 95% without condensation
Specifications subject to change without notice.
Lexicon