Lexicon PCM 81 - REV User Manual page 123

PCM 81 User Guide
Lexicon
Rvb In W, FX In W
These are input width controls for the Rvb and FX blocks. These are essentially
the same as the PCM 81 FX Width and Rvb Width parameters. The difference
is that the width control in the Pitch FX algorithms is located at the input to the
effect. This makes it possible to independently alter the stereo image of material
feeding the two effect blocks.
RvbHiCut, FX HiCut
These parameters provide independent 6dB per octave, stereo high-cut filters
on the outputs of the Rvb and FX blocks.
RvbLoCut, FX LoCut
These parameters provide independent 6dB per octave, stereo low-cut filters on
the outputs of the Rvb and FX blocks.
RvbOutLvl, FX OutLvl
These are independent output level controls for the Rvb and FX blocks.
Rvb Out W, FX Out W
These parameters allow independent control of the stereo image of the output
of each effect block.
3-62